ABIT AN8 ULTRA CHIPSET DRIVER

The audio riser card slot is located to the right of the rear panel assembly. The slots are color coded into two groups, with Dual Channel memory mode active with modules placed in like colored slots. From this window, the user can configure all board FSB and voltage options, as well as system event triggering based on specific BIOS monitored fan headers. The board serial number and revision code are located on a white sticker just above the secondary PCI-Express x1 slot. From this window, you can tie individual programs to a preset overclocking configuration. From the main applet window, all system voltages can be displayed by selecting either of the Voltage V buttons. Monday , September 12, Author:

Uploader:	Mikak
Date Added:	11 November 2012
File Size:	56.51 Mb
Operating Systems:	Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads:	67220
Price:	Free* [*Free Regsitration Required]

Universal abit > Motherboard, Digital Speakers, iDome, AirPace, Multimedia

Riddle me this, batman; WTH is going on with The heat pipe cooler is held to the chipset using 2 screws attached to an under the board bracket. Above the front panel header are the CMOS reset jumper and battery, as well as the onboard floppy port.

The following components are packaged in with the AN8 Ultra board: Selecting the SoftMenu button from the main applet window opens the SoftMenu window. Note that pins and must be jumpered on the front panel audio header for the rear panel cnipset to function correctly.

Selecting the Setting button from the main applet window opens the Advance Settings window. The use of the single chipset nForce4 solution, as well as the regrouping of the board power circuitry, really allowed ABIT to open up this normally tight area. Notice that chipsset Windows-like Start menu displays upon clicking the Add Program button.

ABIT AN8 Ultra - motherboard - ATX - Socket 939 - nForce4 Ultra

The Settings window allows for system response configuration, as well as threshold setting for temperature-based responses. Note that uGuru version 2. From this window, you can tie individual programs to a preset overclocking configuration. The applet allows for full customization through the Settings window, accessed by clicking on the Setup button from the main applet window.

The following integrated components come standard with the AN8 Ultra: The addition of even a small amount of airflow over the heat sinks cooled the area well, however. The applet itself has a variety of pre-set options, as well as the ability for an automatic overclocking chipseg.

All trademarks used are properties of their respective owners. The slots are color coded into two groups, with Dual Channel memory mode active with modules placed in like colored slots. Ritual of the Night Development The biggest surprise was the inclusion of integrated heat pipe-based cooling for the nForce4 chipset.

If you are not comfortable with its automated mode of data collection, the BlackBox utility also supports full manual entry of system data. The GuruClock applet only functions with an uGuru device attached to the board.

[H]ardOCP: ABIT AN8 Ultra

These heat sinks were found to get overly hot during normal operation. According to the revision sticker, the board tested was a version 1. The AN8 Ultra motherboard comes in the standard ABIT nForce4 line packaging, with a large sticker on the lower left corner of the wbit designating the model and supported features.

ABIT is a world renowned computer component manufacturer, known best for their high performance yet stable product lines.

The Power Cycle Control window, accessed by selecting the Power Cycle Control button from within the main applet window, allows for configuration of a timed shutdown, as well as real time statistics on system boot time.

From this window, the user can configure all board Utra and voltage options, as well as system event triggering based on specific BIOS monitored fan headers. Hcipset design and front-end production by mike kane. The GURU1 header, used for integrating with an aftermarket uGuru Panel device, and the front panel header are located in the lower left corner of the board.

The Configure Preset button opens the SoftMenu window with the ability to customize up to 6 preset configurations.

From this window, the user can custom configure the exact actions taken when the BIOS is updated. From the main applet window, all system voltages can be displayed by selecting either of the Voltage V buttons. The board serial number and revision code are located on a white sticker just above the secondary PCI-Express x1 slot.

This latest edition to their nForce4 lineup keeps in this tradition well. This way, all you have to focus on is telling support chkpset the issue you are having instead of listing 3 pages of system specs.